
ASEKO / POOL CARE
Water treatment
Compare four water treatment methods and see which ASEKO products support each one.
POOL WATER TREATMENT
Chlorine
Chlorine disinfects pool water. ASEKO systems with built-in chlorine dosing use CHLOR PURE, a liquid sodium hypochlorite product. Compatible systems also regulate pH, which affects how well chlorine works.
A CLF probe measures free chlorine directly. A Redox probe measures the water’s oxidation–reduction potential, which the controller uses to regulate dosing. Some models also offer timed dosing. Follow the dosing unit’s manual and read the chemical label before use.

POOL WATER TREATMENT
Chlorine-free
OXY PURE uses active oxygen to oxidise organic impurities. In Home Pro Oxy, the controller doses OXY PURE according to pool volume, regulates pH and adds ALGICID on a schedule to control algae.
Continuous FLOC+C dosing helps fine particles form clusters. The coagulation mixer spreads the flocculant through the water so the filter can capture those particles. ASIN Spa uses timed OXY PURE dosing and continuously doses POLY PURE for water clarification.


POOL WATER TREATMENT
Salt
An electrolytic cell produces chlorine on site from salt dissolved in the pool water. Salt Pro reaches its rated chlorine output with a Ti 30 cell at 4 kg/m³ of salt. Salt NET and ASIN Salt reach their rated output at the same salinity with a Ti 20 cell.
Salt Pro and Salt NET offer CLF or Redox control, depending on the model. ASIN Salt runs on a timer. Controllers listed under external electrolysis require a separate electrolyser. Follow the instructions for the installed cell when setting salinity.

POOL WATER TREATMENT
Low Salt
Eox Pro uses electrooxidation at 1.5 kg/m³ of salt. Its Ti 30 cell generates reactive oxygen species alongside chlorine, so the treatment works at a lower salinity than the standard salt systems shown above.
Eox Pro measures Redox and regulates pH automatically. It also doses ALGICID on a schedule and adds FLOC+C continuously to support filtration.

FILTRATION IMPROVEMENT
AFM® activated filter media
AFM® is an activated recycled glass medium that replaces sand in compatible pool filters. Water passes through the bed, where the medium captures suspended particles.
Grade 1 has a grain size of 0.4–1.0 mm and Grade 2 has a grain size of 1.0–2.0 mm.
AFM® can be used with the coagulation and flocculation setup below. The mixer helps fine particles form clusters, and the filter bed captures them.
FILTRATION IMPROVEMENT
Coagulation and flocculation
Some suspended particles are too small for the filter to catch on their own. FLOC+C combines coagulation and flocculation in one treatment so those particles form larger clusters.
PP 10 Flocc can feed FLOC+C slowly and continuously into the circulation line. The coagulation mixer distributes it across the flow before the water enters the filter.
AUTOMATIC FILTER CARE
Filter disinfection during backwash
During automatic backwash, a compatible PRO controller can start an optional PP60 pump to dose CHLOR PURE into the filter. This helps disinfect the filter media and control microbial growth.
The backwash water goes to waste. On Home Pro Oxy, this filter disinfection cycle is separate from the active oxygen treatment used for the pool water.


















